I asked experts how to clean shower mould - they all had the same suggestion

We're all familiar with the challenge of keeping the bathroom clean . As one of the most frequently used spaces in any home, it demands constant attention, especially around the bath and shower. The damp, warm conditions create an ideal environment for mould to flourish and spread. When it becomes embedded in the grout between tiles, it can make your entire bathroom look grimy and unsanitary. So, after countless failed attempts at scrubbing my bathroom tiles clean, I turned to professionals who could guide me on the proper approach. Interestingly, white vinegar wasn't the top recommendation. Instead, many of the experts suggested using another highly versatile cleaning solution - hydrogen peroxide. This natural bleaching substance is safe to use at lower concentrations, and it works by breaking down the cellular structure of mould on solid surfaces such as tiles, reports the Express . Alex Morrissey, founder of Best Roofers and property maintenance specialist, advised: "A dependable bleach and vinegar-free method is 3% hydrogen peroxide on the grout, left to dwell for 10 to 15 minutes before scrubbing with a stiff nylon brush and rinsing. "For stubborn staining, make a paste of bicarbonate of soda with 3% hydrogen peroxide, work it into the lines, leave it for 10 minutes, then scrub and rinse. Repeat as needed until the grey or black hue lifts." Nigel Bearman, home cleaning expert at Daily Poppins , has hailed hydrogen peroxide as 'the most effective' alternative to bleach for tackling mould. He warned: "Bleach can whiten the surface, but it doesn't always penetrate porous grout, so the mould often comes back just as quickly." Praising 3% hydrogen peroxide, available from chemists, he explained: "It works well because it penetrates the grout rather than just sitting on top." However, proper preparation is crucial before beginning the cleaning process. Alex emphasised the importance of removing any lingering water, soap or debris to achieve the best results. He advised: "Results are usually better when the soap film is stripped off first, because oxidisers can reach the mould rather than sitting on residue. Degrease with a mild bathroom cleaner or a few drops of washing-up liquid in warm water and rinse." Another effective solution is oxygen bleach powder - often marketed as a laundry booster - which can serve as a powerful mould removal agent. Lee Keat, founder of Vapor Clean LTD , shared: "When mixed into a paste and worked into the grout lines, it breaks down organic staining without the aggressive fumes many people hate with bleach. Leave it on for around 15 minutes, scrub, then rinse well." And for those looking to stop mould developing altogether, there are two essential steps to follow. Brian Toward, bathroom expert and CEO of Wholesale Domestic , advised: "Ventilation is important to tackle mould problems, so always use an extractor fan or open a window during after showers to reduce the humidity in the room. Also wipe down tiles, grout and sealant with a dry cloth to remove excess moisture after bathing or showering."

स्रोत: Mirror Co Uk